Beaded Clutch, size 28 x 12 cm
- Upholstery fabric, 35 x 30 cm
- Lining fabric, 35 x 50 cm
- Interfacing, 35 x 30 cm
- Bias, 35 cm
- Zipper, 20 cm
- Acrylic stones
- 1 magnetic button
- 2 metal rings
- 2 rivets
- Small leather piece
- 2 carabiner hooks
- Chain, 125 cm
- Polyester thread
Iron the upholstery fabric well, then press on the interfacing.
Sew on the bias on one side --> foto.
Finish the bias nicely.
Prepare the lining with the zipper bag.
See tutorial for a fast zipper bag.
Then cut 2 stripes out of the leather piece, size 10 x 2, fold and sew them --> foto.
Turn one third (with the bias end) of the upholstery material to the inner side (wrong side), sew left and right side well. Then turn the bag to the right side.
Now arrange on the acrylic stones --> foto. Sew them on by hand.
And if you like attach a metal label outside.
Pin the lining into the bag, fix the leather loops on left and right side. Don´t forget to take a metal ring in between. Secure these leather loops with a rivet. Then fasten on the metal button.
Now sew on the lining nicely, could be by hand.
After finishing the bag arrange the handle with a carabiner hook on each side.
Enjoy a new nice clutch!
The design and instruction are only for private use.